Publicité
Les langues disponibles
Les langues disponibles
Operation
1. Make sure that the on/off switch is in position O (off).
2. Connect the power plug to a common household power outlet.
3. Turn the product on (on/off switch to position I). The power indicator built into the on/off
switch lights up when the product is on.
Maintenance and cleaning
Never use any aggressive cleaning agents or chemical solutions as these may cause
damage to the housing or impair the product's functioning.
Do not apply too much pressure to the product's surfaces as this may cause
scratching.
• Besides occasional cleaning, the device is maintenance-free.
• Before cleaning, turn off and unplug the product. Allow it to cool down completely.
• Use a dry, soft and clean cloth to clean the product's exterior surfaces.
• Use an off-the-shelf glass cleaner to clean the glass plate.
• Remove any dust with a long-haired, soft and clean brush or a vacuum cleaner.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household
waste.
At the end of its service life, dispose of the product according to the relevant statutory
regulations.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Technical data
Operating voltage ......................220 – 240 V/AC, 50/60 Hz
Power consumption . ..................425 W
Protection class .........................I
Cable length ..............................1.5 m
Dimensions (W x H x D) ............600 x 600 x 14 mm
Weight .......................................6.2 kg
All manuals and user guides at all-guides.com
273 mm
402 mm
Fig. 1
These operating instructions are published by Conrad Electronic SE, Klaus-Conrad-Str. 1,
D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming,
or the capture in electronic data processing systems require the prior written approval by the editor.
Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in
technology and equipment reserved.
© Copyright 2013 by Conrad Electronic SE.
V1_0713_02-ETS-Mkde
Publicité
