essentiel b RRV-300DAB+ Notice D'utilisation page 27

1.
Press on the button several times until you select the auxiliary source.
2.
Connect the 3.5mm audio plug to your audio source, such as an MP3/MP4 player, a
laptop, etc.
3.
Plug the other end of the cord into the AUX auxiliary input jack on the clock radio.
4.
Start playback, and adjust the volume on your audio source.
connectaremovablemedium
1.
Connect your USB key or insert your micro SD card into the ports on the back of the
clock radio.
2.
Press on the button several times until you select the USB source or the SD source.
3.
Playback starts automatically.
To decrease the volume, press the
4.
Press the or buttons to go to the previous or next track.
5.
Press the button to pause or resume playback.
settingthealarms
Setting the alarms
1.
After setting the time, press and hold the
1 setting. The hour digits flash on the screen.
2.
Press the or buttons to set the hour digit then press the
confirm. The minute digits flash.
3.
Press the or buttons to set the minute digits and then press the
to confirm.
4.
Now select the duration of the alarm (
button to go to the next step.
5.
Press the or buttons to select the playback source (
the button to go to the next step.
52
V.1.0
settingthealarms
All manuals and user guides at all-guides.com
To increase the volume, press the
button.
or
button for 3 seconds to access the Alarm
button to
15 , 30 , 45 , 60 , 90 or 120 minutes ), then press the
FM , DAB or Buzzer
6.
Select the station of your choice, then press the
7.
Now you have to select the alarm frequency: once (
day ), the first five days of the week (
button to go to the last step.
8.
Press the or
9.
Press the
alarm setting is saved.
10.
To set the second alarm, press and hold the
1 to 9 described above.
Activate or deactivate the two alarms
By default, a set alarm is not activated.
To activate the alarm, press the
button.
The or icons appear to the right of the time. The
Do the same if you wish to deactivate the alarms.
You can also briefly press the
buttons to select "YES"
Stoppingthealarm
When the programmed time is reached, the alarm rings and the
on the screen. Press one of the buttons on the clock radio once (except the
button
button) to stop the ringing.
If you selected all days of the week (
weekends ( Weekends
for the next day.
). Press
button.
once ), every day of the week (
week ) or on weekends ( Weekends
buttons to adjust the ringer volume.
"ALARM Stored"
button one last time. appears on the screen, and the
button for 3 seconds, then follow steps
button twice or the button.
or
button or the button. Then press the
( ON ) or "NO" ( Off ). Press the button to confirm.
alarme 1
Daily ), the first five days of the week (
), the or icons remain displayed and the alarm remains active
every
). Press the
alarms are activated.
or
or icons flash
Weekdays ) or
53
V.1.0
settingthealarms