Publicité
Les langues disponibles
Les langues disponibles
Double ceiling boom
R+M Nr. 109 767 921
Tension
spring
108 901 858
(e)
108 329 27
Swivel
AGR 1/4"
We recommend checking swivel-
connections once a year for normal
wear and tear.
No greasing required
(e)
Assembly instructions
1. Install the ceiling boom (a) with the mounting plate (b)
to the concrete ceiling or to the steel beam.
Attention: bearable hole load (e.g.: bolt M12)
at least 20 kN
2. Tightly fasten the high pressure hose or the high
pressure pipe connection coming from the high
pressure pump, to either top or side connection.
- for side inlet: mount adaptor (c) on the side and plug
top inlet with stud bolt (d).
- for top inlet: mount adaptor (c) on top and
plug side inlet with stud bolt (d).
3. Tightly fasten the high pressure hose with lance or brush
to the swivel (e).
High pressure hose
341 144 001 894 9
(a)
341 144 001 744 9
High pressure hose
Mounting plate
Attention: hole load bearing
capacity max. 20 kN
Please no loads at the end of the
boom arm
For your own safety
- Read all instructions before the
- Our products should only be installed by experienced users of high
- Always use protection gear when using products connected to high
- Never direct any high pressure water-jet at humans, animals or electric
- Before any maintenance or nozzle-change, turn off the high pressure
- Safety regulations and guidelines (Accident Prevention Rules) from the
- Nozzle installation according to Nozzle manufacturer.
- No modifications to the unit are permitted.
Coupling 1/4" F
108 510 19
Rubber cone
108 901 805
108 409 26
Swivel 90°
Seal kit for swivel 90°
Stud bolt
578 109
initial operation. Check their
proper condition and that they
operate safely.
pressure equipment
pressure.
installations.
water supply, e.g.: turn off and secure the power switch.
manufacturer of your high pressure cleaner are applicable.
(b)
(d)
(c)
(c)
(c)
(c)
108 902 721
Housing ring
108 645 02
Seal kit for
housing ring
108 902 709
Ball bearings
750 140 2
108 902 701
Retaining ring
(d)
20
180
www.rm-suttner.com
Snap ring
108 902 725
Coupling
Coupling
108 901 935
(b)
Publicité
