Tecknet U510P Mode D'emploi page 6

device type and may not work for other device models. To
auto-optimise the Super Charging Port for a different device type,
please restart the optimisation by turning the power OFF and
turning the power ON. This will allow the Smart USB Charging Port
Controller reset and self-adjust the optimisation for the next type of
device.
6. Continuous use of the charger at full-load (21A) may lead to
overheating.
Warning
Before using this product for the first time, please carefully read and
follow all instructions and warnings.
1. Please do not modify, disassemble, open, drop, crush, puncture
and shred the product.
2. Do not put this product in damp, direct sunlight or high temperature
C
environments.
3. Misuse, demolition, mishandling or other operation of the product
that fails to comply with this manual may result in damage the
connected device or to the USB Charger Hub. In the event of
U510P
damage resulting from such types of actions, TeckNet is not liable
for compensation or maintenance responsibility.
socket
4. This product is not a toy, keep it away from children and ensure that
all persons who use the product read and follow these instructions
arger
and warnings.
Disclaimer
nd will
ny c
Every effort has been made to ensure that the information and
wer
procedures in this guide are accurate and complete, no liability can be
b &
accepted for any errors or omissions and we reserve the right to make
er
any changes without further notice to any products mentioned herein.
d as
Warranty
ports.
e
We warrant that product from authorised distributors will meet the
applicable product specifications and be free from all defects in
design, assembly, material and workmanship. Please contact
each
TECKNET retailers, or visit our website for more information about the
ecific
product.
hed
All manuals and user guides at all-guides.com
-- 4 --