Laney Audiohub Venue AH2500D Mode D'emploi page 5

SETTING UP
ACCESS TO THE MIXER AND ACCESSORY BOX:
Gently tilt the mixer/accessory box then
unhook from the cab.
Always switch off and disconnect the power cord when not in use.
All manuals and user guides at all-guides.com
Slide the catch to
the left as indicated.
The mains inlet, power switch and fuse are located to the right of
the mixer.
PLEASE NOTE:
The accepted input voltage range is preset to:
100-110V~ 50/60Hz or 200-240V~ 50/60Hz.
This cannot be changed by the user.
Only replace the fuse with the type stated!
POWER AND SPEAKER CONNECTIONS:
MAXIMUM POWER CONSUMPTION - 300 WATTS
FUSE
SUPPLY VOLTAGE AND FUSE RATING:
220-240V~ 50/60Hz T3.15A L 250V
MAXIMUM POWER CONSUMPTION - 300 WATTS
SUPPLY VOLTAGE AND FUSE RATING:
100-110V~ 50/60Hz T3.15A L 250V
MAXIMUM POWER CONSUMPTION - 300 WATTS
4