DCU Tecnologic 70100045 Manuel D'installation page 4

ENG
ACCESSORIES INCLUDED:
Bracket Connector
Screw Pack
4 x 25(mm) – 4 units
Suitable sizes:
5 x 25(mm) –4 units
32
6 x 25(mm) – 4 units
8 x 25(mm) – 4 units
13 x 6.2 x 1.5(mm) – 4 units
Maximum weight
17 x 8.2 x 12(mm) – 4 units
M10 – 1 unit
36.5KG
7 x 80 – 4 units
10 x 7 x 60 – 4 units
Mark 4 locations on the wall
70
capacity:
Mark 3 locations on
the studs of the wood
Attach the tv to the bracket
or
Stent body
Drill 4 holes at the marked positions
Drill 3 holes at the marked positions
Cable storage:
Cable cover
Cables
Full Motion TV Mount with 3 arms
Install 4 anchors by inserting them into the drilled holes, then
install 6 hex lag screws through the wall plate mounting holes
and into the anchors.
Install 3 hex lag bolts through the wall
plate mounting holes and into the
pre-drilled holes.
Adjust the tilt angle
or
TV installation with interface
or