Publicité
Les langues disponibles
Les langues disponibles
Halogen Heater
Item no. 561156
1. Intended use
This product is only suitable for well insulated spaces or occasional use.
This halogen heater is suitable for heating in places such as offices and living areas. By simply
pressing a button, the halogen heater will automatically turn to the left and and to the right for an
optimal heating effect. The halogen heater requires a power supply of 230 V/AC, 50 Hz. You may
therefore only use a 230 V/AC power outlet of the public supply grid. Never try to operate the
halogen heater with another voltage. Use is only permitted in closed, dry rooms, i.e. not outdoors
or in the bathroom. Select a place to set up the halogen heater where it will be protected from
moisture, heavy soiling or overheating.
Unauthorised conversion and/or modification of the device are inadmissible because of safety
and approval reasons. Any usage other than described above is not permitted and can damage
the product and lead to associated risks such as short-circuit, fire, electric shock, etc. Please read
the operating instructions thoroughly and keep them for further reference.
2. Delivery content
• Halogen heater
• Stand
• 2 x screws
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code. Follow the instructions on the website.
4. Safety instructions
We do not assume liability for resulting damages to property or personal injury
if the product has been abused in any way or damaged by improper use or
failure to observe these operating instructions. The warranty will then expire!
The icon with exclamation mark indicates important information in the
operating instructions. Carefully read the whole operating instructions before
operating the device, otherwise there is risk of danger.
Do not cover the device (e.g. with a curtain, blanket, etc.) to avoid overheating
of the device.
Persons / Product
• The halogen heater should be kept out of the reach of children. Be particularly careful when
children are present, especially when they try to push objects through openings in the housing
and into the device. There is risk of a fatal electric shock. When using the heater, keep a good
eye on children and animals present so that they do not burn themselves on the heater or start
a fire by knocking the heater over or covering it up.
• Do not use the heater near other sources of heat. Position the heater so that flammable objects
will not be set alight (e.g. curtains). Therefore make sure the heater is in a safe position. The
air inlets and outlets on the heater must be unobstructed. The heater must not be covered up,
e.g. with cloths. There is risk of fire. The halogen heater must be at least 50 cm away from
walls or other objects when in operation.
• Never touch the housing or the air outlet grill when the heater is in operation or has not yet
cooled down (risk of burns).
• Do not insert any objects into the air outlets or into the interior of the heater (risk of an electric
shock).
• On commercial premises, the relevant accident prevention regulations of the relevant
professional insurance association for electrical systems and operating materials are to be
observed.
• Never pour out liquids above the device. There is risk of a fatal electric shock. Should this
happen, pull the mains plug out of the socket immediately and contact an expert.
• Always unplug the power plug from the mains socket before cleaning the device.
• The product must not be subjected to heavy mechanical stress.
• The product must not be exposed it to extreme temperatures, direct sunlight, intense vibration,
or dampness.
• Before using the device, check that the mains voltage that you want to operate the device with
matches the voltage specified on its nameplate.
• Check both the halogen heater as well as the connection cable for damage from time to time.
• Place the power supply cable such that it does not come into contact with hot parts of the
heater.
• Do not use a double adapter or a similar device to connect the heater to the mains.
All manuals and user guides at all-guides.com
• Never switch the halogen heater on immediately after having taken it from a cold to a warm
Version 06/18
• Never pull on the connection cable to move the device. Make sure that the connection cable
• Do not use the halogen heater in rooms or under adverse ambient conditions where there are
• If you have reason to believe that safe operation is no longer possible, take the halogen heater
Miscellaneous
• Servicing, adjustment or repair works must only be carried out by a specialist/ specialist
• Live components may be exposed if the cover is opened or if components are removed.
• If any questions arise that are not answered in this operating instruction, contact our Technical
5. Assembly
1. The stand must firstly be mounted on the housing of the halogen heater. Use the following
2. The stand can best be mounted when the heater is lying on its back.
3. Remove the two screws from underneath the heater, pull the connection cable through the
4. Secure the stand on the heater by tightening the two screws.
environment. The condensation water that develops may destroy the heater. Allow the heater
reach room temperature before turning it on.
does not get caught somewhere unintentionally, leading to a danger of the heater falling over.
Do not wind the connection cable around the heater. Do not kink the connection cable.
or could be combustible gases, vapours or dust.
out of operation immediately and secure it against inadvertent operation. It must be assumed
that safe operation will no longer be possible if
- There is visible damage to the halogen heater
- The halogen heater no longer functions
- The heater has been stored for a long period of time under unfavourable conditions
- The heater may have been subjected to considerable stress during transportation.
workshop.
Terminals may also be live. Before maintenance, repair work or replacing components or
assemblies, the halogen heater must be disconnected from the mains power. Maintenance
and repair on the halogen heater must only be carried out by a SPECIALIST who is familiar
with the hazards involved and with the relevant regulations.
Advisory Service or other experts.
Before assembling the halogen heater, disconnect the mains plug from the
mains power.
diagram to help you when assembling the heater.
middle of the stand and attach the stand.
1
Housing
2
Stand
3
Fastening screws (2 pieces)
4
Safety device
5
Power supply cable
Publicité
