GO/ON NS 900 ALICANTE Traduction De La Notice Originale page 24

Original instruction manual
INSTALLATION METHOD
1. Take the appliance out of the package.
2. Check that the appliance shows no signs of damage before
using.
CONTROL PANEL
CONTROL PANEL BUTTONS INTRODUCTION
With the selector knob in the "OFF" position, plug the
1.
heater into a standard 220-240A AC electric outlet.
Turn the control knob to "Low" for 450W or "High" for 900W.
2.
Turn the control knob fully to the "Osc" position to activate
3.
the oscillation feature about 70°.
Turn the selector knob to the"OFF" position and unplug the
4.
unit when you have finished using it.
46
All manuals and user guides at all-guides.com
En Original instruction manual
CLEANING AND MAINTENANCE
1. Always disconnect the appliance and let it cool down com-
pletely before carrying out any maintenance.
2. Use a vacuum cleaner to remove dust on inlet and outlet
surfaces.
3. Clean the outside of the unit with a damp cloth and then dry
it with a dry cloth. Never immerse the unit in water, nor let
water drip into the unit.
STORING
1. Always disconnect the appliance, let it completely cool and
clean it before storing.
2. If you do not use the device for a long period, put back the
unit and the instruction manual back into the original carton
and store in a dry and ventilated place.
3. Do not place any heavy items on top of carton during stor-
age as this may damage the appliance.
02/2019 47
En
02/2019