Zeck Audio STAC Vision 1.2 Consignes D'utilisation page 8

Vision 1.2
5.
Precaution
Never touch the nozzle. The Nozzle is hot, there is danger of burning yourself.
In short distance to the nozzle , the generated fog is hot too, you can scald yourself.
Take care that the safty distance between the nozzle und human beings, animals and infla-
mable materials is always at least 60 cm.
5.
The lit green indicator light on the pushbutton shows that the unit is now in 'standby'
mode. A fog output can now be generated as long as the pushbutton is depressed for a
maximum continuous duration of 20 seconds. After this time, the unit needs a short period
of reheating which is indicated by a dark indicator. After the green indicator light is lit
again, the unit is again in 'standby' mode and a new fog output can be generated.
6.
Do not open unit or connectors unless you are an authorized STAC
STAC company is not responsible for any damage resulting from disregarding this warning.
®
7.
This unit must be earthed through the protective-earth contact on the three-pong mains
connector.
8.
Replacement fuse must have exactspecifications as stated on the unit identification label.
Have a lot of fun and success with your STAC
See for technical specifications on page 13
owner`s manual Stac Vision 1.2 © Zeck Audio
All manuals and user guides at all-guides.com
owner`s manual
Vision 1.2
®
® service person. The
9