Télécharger Imprimer la page

RETOX 2S60 Mode D'emploi page 6

Publicité

All manuals and user guides at all-guides.com
Setting the Date
1. Pull out the crown to the 1st Position.
2. Turn the crown counter clockwise to set the date. Push back the
crown to the normal position.
Setting the Time
1. Pull out the crown to the 2nd Position.
2. Turn the crown either clockwise or counter clockwise to set hour
and minute hands. When the crown is pushed back to the nor-
mal position, the second hand starts moving.
Watchband
1. Lift up the safety bracket. To open the fold-over
clasp, press both pins inwards, move the clasp
sidewise up and lift up.
2. To close the fold-over clasp, press down until
the clasp locks audibly.
To shorten the watchband to the desired length,
use a suitable link remover or similar tool (e. g.
Art. No. 849067 or 804823).
Bezel with Sun Point
You can use the bezel to record a second time.
1. Turn the bezel with the sun point only counter clockwise, so the
sun point lines up with the minute hand.
2. After the reference time has passed, count off the elapsed time
on the scale of the bezel (scale from 0 – 60 minutes).
Operation
V

Publicité

loading

Ce manuel est également adapté pour:

87 09 68