DURAVIT Ketho KT 7531 Notice De Montage page 6

1
Ø ⅜"
110 V
NOTICE
A 110 V GFCI outlet is required.
> Mark the holes to be drilled
for the anchors.
> Use a 3/8" drill bit.
> Drill the anchor holes that
have been marked.
5
> Remove the mirror
fronts of the cabinet by
unlatching each hinge.
9
4x
> Add four plastic caps.
2
4x S8
> The plastic anchors
provided are for concrete
wall applications.
6
> Plug the unit into outlet.
> Lift the unit up and onto
the mounting brackets.
> Lay the bottom of the
mirror against the wall.
> Tighten the set screw to
secure the mirror in place.
10
8x
> Add eight supplied shelf
brakets.
3
4x 5,5x50
> Screw the bracket(s) to
the wall the specified
locations.
> For wood stud walls, bolts
should be screwed into
wood backing.
7
> Check the cabinet is
leveled and securely
attachted to the wall.
11
> Add shelving to unit.
> Reattach the mirror
fronts.
4
"
> 3
> Make sure there is
clearance of minimum 3"
between mirror and the
washbasin.
8
> Check the screws which
allow adjustments of the
unit.
> The top screw will adjust
front to back and the
bottom screw will adjust
up and down.
> Make adjustment to the
level as needed.
12
> To make final door
adjustments remove plate
with Duravit logo.
MAL_Ketho_KT7531/18.10.2
6