Hendi 272800 Mode D'emploi page 23

All manuals and user guides at all-guides.com
MAINTENANCE
To enjoy years of outstanding performance from your heater, make sure you perform the following maintenance activities
on a regular basis:
Keep exterior surfaces clean.
Use warm soapy water for cleaning. Never use flammable or corrosive cleaning agents.
While washing your unit, be sure to keep the area around the burner and pilot assembly dry at all times. If the gas control
is exposed to water in any way, DO NOT try to use it. It must be replaced.
Airflow must be unobstructed. Keep controls, burner and circulation air passageways clean. Signs of possible blockage
include:
Gas odor with extreme yellow tipping of flame.
Heater does NOT reach the desired temperature.
Heater glow is excessively uneven.
Heater makes popping noises.
Spiders and insects can nest in burner or orifices. This dangerous condition can damage the heater and render it unsafe
for use. Clean burner holes by using a heavy duty pipe cleaner. Compressed air may help clear away smaller particles.
Carbon deposits may create a fire hazard. If any carbon deposits develop, clean dome and engine with warm soapy
water.
Note: in a salt-air environment (such as near the sea), corrosion occurs more quickly than normal. Frequently
check the corroded areas and repair them promptly.
SERVICING
Please consult your local dealer for servicing this appliance and replacement of its parts. The servicing of the appliance
shall be carried out only by authorised personnel.
Caution: do not use unauthorized parts or components for this appliance, only use original equipment replacement parts
and components. The use of unauthorized parts or components will void the warranty and can create an unsafe condition.
STORAGE
There is no limitation on the storage of the appliance indoors provided that the cylinder is removed from the
appliance.
Between uses:
Turn control knob OFF
Turn gas cylinder OFF
Store heater upright in an area sheltered from direct contact with inclement weather (such as rain, sleet, hail, snow, dust
and debris).
If desired, cover to protect exterior surfaces and to prevent build up in air passages.
Note: Wait until heater is cool before covering.
During periods of extended inactivity or when transporting:
Turn control knob OFF.
Disconnect gas cylinder and move to a secure, well ventilated location outdoors. DO NOT store in a location that will
exceed 50°C.
Store heater upright in an area sheltered from direct contact with inclement weather (such as rain, sleet, hail, snow, dust
and debris).
If desired, cover heater to protect exterior surfaces and to prevent build up in air passages.
Note: Wait until heater is cool before covering
- 22 -