Publicité
Les langues disponibles
Les langues disponibles
Talos with raised bollard
A
GB
Talos with lowered bollard
8358
Drwg. No.
22-25 mm
33 mm
!
1 mm
HALL LIMIT SWITCHES SERIE TALOS
Limit switch on rise (blue cable)
Code 945206
Limit switch adjusting: you must replace the
limit switch in the same position of the
previous.
Set the limit switch in such a way that when
the bollard is retracted, there is 1 mm distance
between the head of the screw (stop A) and
the bollard (see drawing of the retracted
bollard).
It is important that the bollard NEVER hits on
the stop screws during its movement.
Attention: the stop screws must not be
regulated.
Once the system is tested, tighten the two
screws of the limit switch.
Limit switch on lowering (gray cable)
Code 945207
Publicité
