1. NOTICES
This device complies with Part 15 of FCC regulations.
Operation is subject to the following two conditions:
1. This device may cause harmful interference.
2. This device may receive interference that can cause affect the operation of this
equipment.
Note
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference problems at
his or her own expense.
Caution
Alteration or modifications carried out without. appropriate authorization
may invalidate the user's right to operate the equipment.
1. A regulated DC12V 500mA power supply is recommended to ensure the best picture
quality and stable operation.
An unregulated power supply may cause damage to the camera.
Using an unregulated power supply will void the product warranty.
If your monitor is switched to high impedance, then please adjust accordingly.
2. Do not attempt to disassemble the camera to access internal components.
Refer servicing to your dealer.
3. Never face the camera towards the sun or any bright or reflective light, which may
cause smear on the picture and possible damage to the image sensor.
4. Do not remove the serial sticker for the warranty service.
All manuals and user guides at all-guides.com
3