Roth Audio CHARLiE 2.1 Manuel De L'utilisateur page 4

Connecting the RothDock
1. Press the ID button on the top surface of RothDock
for 5 seconds until the led flashes on and off.
2. Then press the ID button on the back of the speaker
until the led flashes.
3. When both units are paired, the lights will remain
on, and you should hear a steady tone through
your speakers. The process should only take a few
seconds.
Connecting the speakers Connecting the speakers
Connect the audio cable from the twin audio Connect the audio cable from the twin audio
outputs of the CHARLiE's subwoofer to the outputs of the CHARLiE's subwoofer to the
audio inputs on the back of his speakers. audio inputs on the back of his speakers.
Erm, that's it.
iPod/iPhone Connector
Shows when
RothDock input's
connected
4
All manuals and user guides at all-guides.com
LED
Connecting other devices
You can correct other devices by using the auxiliary
input on the back of the dock and also directly into the
speaker by using the auxiliary input or USB inputs.
• Music player (MP3, MP4 or mobile phone)
• CD Player
Computer
•
ID Button