orbit baby G2 Livret D'instructions page 15

Getting Started
Remove all the parts from the box. You should have received a stroller frame, stroller seat, support
bar, snack tray, sunshade, footrest, two (2) front wheels, and two (2) rear wheels. These parts are
illustrated in your manual foldout.
⚠
WarNING
PINCH HAZARD:
◦
Avoid injury from pinching or finger entrapment. Keep children away when unfolding the
stroller. Keep your hands clear of moving parts when folding and unfolding the stroller.
◦
Stroller must be fully erected and locked in position prior to use. Listen for the audible
CLICK to confirm that it is fully deployed.

Unfolding the stroller frame
⃞ Your stroller frame comes folded in the box.
⃞ Holding the twist grip Ⓡ in your left hand, push out on the fold lock Ⓣ with your right thumb.
⃞ Rotate the handlebar upward with your right hand.
⃞ Lock the handlebar in place. You will hear a CLICK.

assembling the stroller frame (required for initial assembly, storage and travel only)
⃞ Insert the rear wheels Ⓦ into the rear legs. You will hear a CLICK when they are locked in place.
⃞ Insert the front wheels Ⓚ into the front cross brace. You will hear a CLICK when they are locked
in place.
⃞ Close the cargo pod Ⓤ by clasping cargo pod handles vertically. You will hear a CLICK.
⃞ Insert the cargo pod into the stroller frame. You will hear a CLICK when it locks in place.
Manual Text Booklet – Orbit Baby Stroller G2 – ENGLISH – 7
⚠