Publicité
Les langues disponibles
Les langues disponibles
Installing the PowerMount Wall Unit
and Wall Mounting Plate
Remove all pieces of the PowerMount system to ensure
you have all the necessary parts.
Be sure to choose a mounting location with convenient
access to an AC wall outlet.
Wood Stud Mounting:
1)
Using an electronic stud sensor, locate a wall stud
at your desired mounting location.
�����
2)
With the help of a friend, vertically position
�����
the PowerMount wall unit on the wall stud. Using
the provided level, confirm that the PowerMount
is vertically straight.
3)
Mark the stud center in the power unit's top
and bottom mounting holes with a pencil.
Remove the power unit from the wall.
4)
With your electrical drill and 3/16 in/5 mm bit,
pre-drill a 3 in/76.2 mm deep hole at each mark.
5)
Align the power unit's mounting holes with the holes
in the wall.
6)
While one person holds the power unit, set the
wall mounting plate inside the power unit's recessed
area. Hold the mounting plate and power unit firmly
in place.
12
All manuals and user guides at all-guides.com
Publicité
