SET-UP AND USE
Assembling the appliance
Remove all packaging and do not leave the packaging material such as plastic bags,
polystyrene and elastic bands in easy reach of children as they may cause serious injuries.
Take out all the parts of the appliance.
Follow below insctructions on how to assemble the fan:
Before continuing your assembling, ensure that the fan body (7) is placed on a flat and
stable surface. Unscrew by turning clockwise the nuts for the back grid and the spinner from
the motor shaft. Take out the plastic tube protecting the shaft.
All manuals and user guides at all-guides.com
Turn the fan body upside down (7). Ensure to
stabilize your position to avoid damaging the motor
head.
Insert the base onto the bottom of the fan body,
ensure the holes of both bases are aligned. The part
showing the rating plate shall face you.
. Insert each screw into each hole and tighten it with
a screw driver until its blocking point.
Attention: Ensure to not over tightening the screws to
avoid damaging the fan.
At the end of the operation, turn the fan back to its
right position and place it on a stable and flat surface.
2
ENGLISH