Focusing
You can focus automatically using the autofocus function of your video camera
recorder.
Refer to the instruction manual of your video camera recorder.
(1) Set the video camera recorder in the automatic adjustment mode.
(2) Set the zoom in the telephoto position (T).
If it is in wide-angle position (W), the corners of the viewfinder may be dark
(eclipse) and the focus will not be clear.
In that case, it is easier to find the subject if the zooming is set to the wide-
angle side (W) a little before recording.
(3) Adjust the focus with the focus ring of the telescope.
The autofocusing of the video camera recorder adjusts the focus automatically.
Focus ring
Focusing manually
When it is difficult to adjust the focus for example, when recording a subject with no
contrast (wall or sky), adjust manually.
(1) Set the video camera recorder in the manual focus mode.
(2) Set the zoom in the maximum position of the telephoto side (T).
(3) Adjust with the focus ring of the telescope.
In the automatic
adjustment mode
11
EN
-EN