ADS Technologies Media-Link MXL-581 Mode D'emploi page 14

All manuals and user guides at all-guides.com
SECTION THREE: Appendix
Appendix A: Troubleshooting
This section answers some Frequently Asked Questions (FAQ). These
are the answers for the most common problems encountered. If your
problem persists, contact with our Technical Support Department.
Q1: Media-Link Device is not connecting to Media-Link Software
Answer: Your Media-Link device can be connected to Media-Link
Server PC via a home network using either a wired or wireless
configuration. Firstly, go into the IP Configuration setup page :
Press the Setup button on your Remote Control. Select IP Config using
the Navigational buttons on your remote control, press Enter. Make
sure that automatic configuration is selected if you have a DHCP server
available in your home network. If not, please manually key-in the
configuration according to your network environment settings.
Q2: Media-Link Device still not connecting to Media-Link
Software although the network settings are configured properly
Answer: If you have a wired network configuration make sure that
the LAN cable is firmly plugged into both your Media-Link device
and the switch/hub you are using.
Q3: Media-Link Device is not connecting to the internet
Answer: Your Media-Link Device may be connected to the internet
via your home network if you have a DSL or Broadband Internet
connection. Make sure that the following connections are active and
working:
1. Your Media-Link's connection to your home network.
2. Your home network's connection to the internet
If your Media-Link device is having trouble connecting to the
internet, please check the following :
9