marinco SPL-12W Mode D'emploi

marinco.com
IMPORTANT!
READ THESE INSTRUCTIONS BEFORE INSTALLING AND USING THIS PRODUCT.
The Marinco Precision spotlight uses a super bright 100 Watt, replaceable H3 Halogen bulb
that produces a rich yet intense beam that can illuminate objects up to 1,000 ft away. It is
IP56 Weatherproof rated for extreme enironments, with a UV weather resistant housing and
fully enclosed tilt function driven by quiet motors that can withstand extreme temperatures
(5°F to 113°F or -15°C to 45°C). It has been designed and tested to withstand the harsh
marine environments including high humidity, salt water spray, shock, and vibration.
Innovative construction allows for upside down mounting and reverse motion programming.
Precision circuitry allows for remarkable aiming and tracking with two speed choices. The
spotlight has a 30 minute shut-down timer. If the spotlight is left unattended for more than
30 minutes, the spotlight will turn off. The shut-down has no effect on the SOS function of
the spotlight.
The Precision remotes have glow in the dark buttons and include one touch Automatic
Sweep and SOS options. The wireless remotes transmit a signal up too 200ft (60m). While
the spotlight comes with a wireless bridge remote there are two more optional remotes:
a wireless handheld remote w/lanyard (SPLR-1) and a hard wired bridge mount remote
(SPLR-3).
Package Includes:
• Spotlight with 12 Volt bulb installed
• Mounting bracket (no fasteners included)
• Wireless Bridge Remote (SPLR-2)
All manuals and user guides at all-guides.com
502-2 & 503-2 instructions
Installing and Using the
Precision Spotlight
MODELS: SPL-12W, SPL-12B, SPL-12C
Español ................................. 8
Français .............................. 16
SPLR-2 (included)
SPLR-3
• Instruction manual
• Additional 24 Volt bulb**
**(models SPL-12W, SPL-12B, SPL-12C only)
Instructions
SPLR-1