iCES IF-1040 Manuel D'instruction page 2

All manuals and user guides at all-guides.com
Dear Customer,
Please read these operating instructions through carefully before connecting your device to the mains,
in order to avoid damage due to incorrect use. Please pay particular attention to the safety information.
If you pass the device on to a third party, these operating instructions must also be handed over.
STRUCTURE
1.FRONT GUARD
2.SPINNER
3.BLADE
4.GUARD MOUNTING NUT
5.REAR GUARD
6.MOTOR HOUSING
7.OSCILLATION KNOB
8.STAND
9.SPEED SWITCH
10.BASE
ASSEMBLY
1. Loosen Guard Mounting Nut from the Motor Housing.
2. Position rear guard firmly to motor housing and then fasten by turning guard mounting nut
clockwise tightly.
3. Push the blade along motor shaft. fasten it firmly with spinner by turning counter clockwise.
4. Hang the front guard to Rear Guard with the position fixer provided at the rim of Guard. and
then fix together with clips provided.
OSCILLATION CONTROL
1. Push the oscillation knob to oscillate.
2. Pull the oscillation knob to stop.
CAUTION
1. Read and retain these instructions for future use.
2. Improper installation may result in the risk of fire, electric shock, or serious injury to persons.
3. Power plug must be removed from power socket before cleaning, servicing, maintenance and
when moving from one location to another.
4. The fan should be placed on a flat and stable surface when operating to avoid overturning.
5. The fan should not be placed in a damp place or where humidity is high (such as in a
bathroom).
6. Do not insert fingers or other objects through the fan guard.
7. Unplug from mains if not in use.
8. This is not a toy. Keep out of reach of children.
9. The appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been