Publicité
Les langues disponibles
Les langues disponibles
6
|
Chapter 3: Blower/Vac Assembly
Converting from
Blower to Vacuum, continued
3. Connect the lower and upper vacuum
tubes together (see Figure 3-6). Align
the ridge on the bottom tube with
the channel on the top tube. Press
together until you hear a "snap".
4. Connect the tubes to the vacuum tube
adapter (see Figure 3-7). Align the tab
on the top tube with the notch on the
vacuum tube adapter. Press together
until you hear a "snap".
5. Position front of vacuum tube adapter
assembly over vacuum bag adapter
hook (see Figure 3-8).
6. Pivot vacuum tube adapter assembly
to bottom of blower/vac housing.
Slightly press locking lever on vacu-
um tube adapter to allow adapter to
lock into place (see Figures 3-9 and
3-10).
Figure 3-6: Conntecting lower and upper vacuum tube
together
All manuals and user guides at all-guides.com
Notch
Tab
Figure 3-7: Connecting vacuum tubes to vacuum tube
adapter
1
Figure 3-8: Attaching vacuum tube adapter to
blower tube hook
2
3
4
5
Figure 3-9: Pivoting vacuum tube adapter to
blower/vac housing
Figure 3-10: Pressing locking lever
118034
Publicité
