Publicité
Les langues disponibles
Les langues disponibles
AQA stop Wireless
with AQA Guard floor sensor
AQA stop Wireless with AQA Guard floor sensor
1
Intended use
For opening and closing a water-carrying line in buildings manually or
through remote control after an event is reported by the floor sensor(s).
AQA stop Wireless comprises a shut-off valve and control unit with a
power supply and EnOcean® wireless module.
The shut-off valve comprises a ball valve that is certified for use with
drinking water and includes an electric motor that is integrated into the
water-carrying line.
Four designs with suitable connections are available for a variety of line
diameters: G ¾", G 1", G 1¼" and G 1½" connection thread.
The shut-off valve for the water-carrying line can be opened and closed
in three different ways:
–
By mechanically opening and closing the shut-off valve using the
control lever
–
By electrically opening and closing the shut-off valve using buttons
on the control unit
–
By closing the shut-off valves via the floor sensors
The control unit is in constant contact with the programmed floor
sensors. An event message is triggered if a leakage is detected by
the floor sensors (for example, due to leaking household devices
or a burst pipe in a water line). The water line is then closed by the
AQA stop Wireless to prevent any more water from escaping.
2
Function
If the floor sensor comes into contact with water, the AQA stop Wireless
cuts off the water supply after about 6 minutes. This minimizes water
damage that can occur due to pipe bursts and pipe cracks.
Current version dated:
Replaces all previous versions
Ref. installation/operating instructions no.:
3
List of supplied parts
AQA stop Wireless comprising:
1. Brass shut-off valve with drinking water certification.
2. Control unit with power supply and EnOcean wireless module and
0.9 m mains cable.
3. Floor sensor with EnOcean technology.
4
Installation conditions
The range of the floor sensor depends on the materials installed in the
building.
The unit requires a constant power supply.
Observe all applicable installation regulations, general guidelines and
technical specifications.
An earthed power socket is required for the electrical connection.
5
Functional and warranty conditions
This BWT product requires regular functional monitoring, maintenance
and replacement of important parts after certain intervals.
See the installation and operating instructions for the maintenance
intervals.
EN
Product data sheet
1-534393
POE_DT9702
February 2020
1-510963
Publicité
