Setting up the product
To display the SETUP menus
press h, Adjust, Setup.
Radio
The SETUP RADIO ANTENNAS menu allows
you to choose which antenna is used for each
band, and choose which bands are active.
To set up the antennas
The product provides a choice of two antennas,
Ant.1 and Ant. 2.
Ant. 1 is usually connected to an external rod or
wire antenna via the connector on the back panel.
Ant. 2 can be switched between the internal
antenna, and a second external antenna.
SETUP RADIO ANTENNAS
2 (Int)
2 (Int)
1
Internal
¬
DAB Ant.
FM Ant.
AM Ant.
)
•
Press DAB Ant., FM Ant., or AM Ant. to
specify the antenna for each band.
•
Press Internal or External to switch Ant. 2
between the internal antenna, and a second
external antenna.
All manuals and user guides at all-guides.com
SETUP
Radio
¬
Examples
To receive DAB and FM in an area with high
signal strength on both bands:
Leave the default settings: Ant. 2 set to
•
Internal, and DAB Ant. and FM Ant. set to
A
2 (Int).
L F R E D
E N G I N E E R E D B Y M E R I D I A N
If the internal antenna does not give good
reception:
•
Connect the rod or wire antenna to the Ant.
2 socket, set Ant. 2 to External, and leave
DAB Ant., FM Ant., and AM Ant. set to 2
(Ext).
To choose which radio bands are active
Press ) to display the SETUP RADIO
•
BANDS menu.
Press DAB, FM, or AM to choose which
•
bands are active.
Disc
Aux
Info
)
Disc
The SETUP DISC menu allows you to set up
options for playing DVDs.
SETUP DISC
D
U N H I L L
LB
SHORT
¬
Aspect
AV Sync
To set the aspect ratio
Press Aspect to specify the default aspect
•
ratio as LB (letterbox 4:3), PS (Pan & Scan
4:3), or 16:9.
To correct for video delays
The processing in some displays can delay the
video, causing lipsync problems. The AV Sync
control allows you to compensate for this.
•
Press AV Sync to step between the options
SHORT, MED, LONG, or MAX.
Choose the setting that gives correct
synchonisation between the sound from the
product and the video on your display.
Aux
The SETUP AUX menu allows you to set up the
label for each of the auxiliary inputs.
SETUP AUX
Aux 1
Aux 2
i80
Optical
¬
Aux 1
Aux 2
i80
Optical
)
To set auxiliary input labels
Press Aux 1, Aux 2, Aux 3, or Optical to
•
set the label for the corresponding input.
By default the label is the same as the name of
the input (eg Aux 1), but you can set it to any of
the following:
iPod, Zune, MP3, MD, or TV.
To enable/disable iPod control
•
Press ) to display the i80 Ctrl option.
You can choose between Enabled, which
allows you to control the iPod from the product,
or Disabled, which allows you to play the iPod
without controlling it.
Info
Displays the version number of your product.
5