NuTone NTBZ48 Guide De Démarrage Rapide

QUICK START GUIDE
Your phone is smart. Your home should be too.
Thank you for purchasing a NuTone Smart Home Series product that will allow
you to automate your home on your terms. Manage your comfort and energy
costs at home or across the globe. This communicating, programmable
thermostat allows homeowners to set, adjust, schedule and monitor their
thermostat from their wall or their smartphone. Choose your favorite Home
Automation gateway with Z-Wave, connect it to the internet and start adding your
NuTone Smart Home Series Thermostat.
A video of this installation procedure can be viewed on-line at:
www.nutone.com/HomeAutomation
For additional help, please view the NTBZ48 Troubleshooting
and FAQ guide.
INSTALLATION
1
Turn power OFF for HVAC device
at the main circuit breaker panel.
5
Mount back panel to wall.
9
Install 4 AA batteries.
All manuals and user guides at all-guides.com
NTBZ48
Smart Thermostat
Smart Thermostat, Battery Powered
Ensure your favorite home automation gateway (SOLD SEPARATELY) has
Z-Wave, connect it to the internet and you are now ready to add the
NTBZ48 Smart Thermostat.
The NTBZ48 Smart Thermostat has
Z-Wave certification which guarantees compatibility.
TOOLS REQUIRED
• Screwdriver, Flat Head
• Screwdriver, Phillips Head
2
Remove existing thermostat
and back panel.
6
Connect wires to back panel.
See instruction manual for
details.
Y G
R C W
Y2 Y1 G RC RH W2 STANDARD
C W1
Y2 Y1 G R C R W1 O HEAT PUMP
10
Snap face plate in place.
COMPONENTS SUPPLIED
• Thermostat
• Screws, Thermostat Mounting
• Anchors, Plastic Wall
• Sheet, Adhesive Wire Labels
• Batteries, AA
understand the installation instructions and this quick
start guide before installing. This device is intended for
installation in accordance with the National Electric
code and local regulations in the United States, or the
Canadian Electrical Code and local regulations in
Canada. It is recommended that a qualified electrician
perform this installation. Retain instructions and guide
for future use.
3
Remove wires and label to match
old thermostat terminal markings.
G
W R
Y
C
W G R C
Y
EXISTING THERMOSTAT TERMINALS
7
Attach front panel to back panel.
11
Turn power ON for HVAC device
at the main circuit breaker panel.
MODE Heat
Done
FAN
DANGER! SHOCK HAZARD. Read and
4
Remove back panel from
NTBZ48.
8
If battery operated, remove
face plate.
Z-Wave® is a registered trademark of Sigma Designs
F
99045342A