Replacing The Filter; Cleaning & Maintenance - Pro Breeze PB-P01 Mode D'emploi

REPLACING THE FILTER

We recommend cleaning the filter with a vacuum cleaner once a month, and replacing
it once a year or every 5000 hours of use. After 5000 hours of use, the sleep button
will flash continuously as a reminder to replace the filter. After you have fitted a new
filter, hold the sleep button down for 5 seconds to reset the timer.
Instructions:
1. Remove the front panel of the air purifier by holding the upper part of
the panel and lifting upwards and away from the unit.
2. Remove the composite filter by pulling the two tabs at the top of the filter.
3.
Ensure that the new filter is fitted in the same direction with the blue side and
pulling tabs facing outwards.
4.
Reattach the front panel filter.
Replacement filter model number: PB-P01F
CLEANING & MAINTENANCE
Cleaning the unit: Use a soft cloth with water and a mild detergent to wipe down the
outer surfaces.
Cleaning the filter: To extend the lifespan of the filter, a vacuum cleaner can be used to
remove dust from the surface of the filter.
3 | English