Noxon M740 Instructions De Mise En Place page 16

NOXON M740
Analog stereo audio output
Using a cinch (RCA) cable with two connectors on both sides (usually red and black),
connect your NOXON M740 to your amplifier, TV set, AV receiver or similar device. Note
that using this connection, you will really hear only classic left/right stereo sound. You
will not get the "a helicopter is flying right through my living room" effect with this con-
nection.
Making a separate digital sound connection
Connect the S/PDIF (optical) output of the M740 to the S/PDIF IN of your TV set/audio
device. If you use a fibre optic cable (not included), connect the TOSLINK connector of
the cable to the optical connection of the M740. Plug the other connector of your fibre
optic cable into a digital audio device, such as an amplifier or AV receiver.
Connection to external storage media
With its three high-speed USB connections, the NOXON M740 gives you the ability to
connect multiple data carriers at the same time and even copy media between them!
Connection to external data storage media (USB sticks or USB hard drives)
Connect external USB devices to one of the USB ports of the M740. This allows you to
search through the contents of the connected media and play them back. If you have
connected data carriers, they appear in the main menu of the M740. It can take a few
seconds for the data carriers to be detected.
Memory card reader
Insert a supported memory card into the card slot on the front of the M740. To guide the
memory card into the card slot correctly, look for the arrow symbol on the memory card
you are using. This allows you to retrieve and play back content from the memory card
via the main menu of the M740.
Making a network connection
Your M740 is a high-performance network streaming device that enables you to play
back content from your home network or from UPNP devices and network shares of your
computer. In addition, you can share the media connected to the M740 in your network
thanks to the integrated UPnP server. To fully enjoy all the benefits of your NOXON, we
recommend that you integrate it into your network. There are two options for doing this –
using a network cable via the network jack on the rear of the M740 or using the optional
NOXON WLAN stick.
Making a LAN network connection (cable network)
For this type of connection, you need a network cable (min. CAT 5e, not included in the
scope of delivery). Plug one connector of the cable into the RJ45 LAN jack of the M740.
Connect the other connector of the cable to an RJ45 LAN port of your router, switch or
hub.
16