Manhattan 80313 Instructions page 2

UVC Charging Cart with 32 USB-A Ports and 32 AC Outlets
Setup
1 Unlock unit door(s) and open them (NOTE: on front door, pull handle up from bottom and turn
counterclockwise).
2 To fit larger devices, remove bay divider(s).
• Unscrew numbered bar and set it aside.
• To remove divider, pull up on the clip to release it from the bar it's attached to.
• When enough dividers are removed, replace numbered bar and screws.
3 Connect devices to USB ports and power outlets with appropriate
cables. Secure cables with wire clips on dividers.
• Connect USB cables to unit ports.
• Connect power cables to power outlets, feeding cables through holes on back panel.
• Load devices in bays (TIP: for better sanitization, insert laptops open-side up and slightly ajar).
• Connect cables to devices.
2
English
1
3
Instructions