Kohler Clarity Manuel D'instructions Et D'entretien page 8

Clean the Spigot Parts
The spigot can be disassembled and cleaned.
IMPORTANT! Use safe water to clean the spigot parts.
1. Empty the water from the lower container.
2. Remove the spigot from the lower container and unthread the handle.
3. Pull the seatcup from the spigot handle and scrub the threads with safe water.
4. Place the spigot parts in hot water that is 175°F (80°C) for at least 5 minutes.
Rinse parts in safe water.
5. After drying, push the seatcup back onto the handle. Thread the handle back
onto the spigot and reconnect the spigot to the lower container.
1273869-2-A
All manuals and user guides at all-guides.com
8 Kohler Co.