Auria EQ2687 Mode D'emploi page 17

Select input source
To select the required input source:
Press the INPUT button on the remote control, Use ▲▼ to select the
required input source between TV, AV, S-Video, YPbPr 1, YPbPr 2,
VGA, HDMI 1, and HDMI 2.
To confirm the selection, press ENTER.
All manuals and user guides at all-guides.com
13
4. Select your tuner mode from Air or Cable,
then press ► to continue. Connect cable
and/or antenna, and select Scan or Skip
Scan with ▲ or ▼, then press ► to
continue. If you select Skip Scan at this
step, you can still perform channel scan in
Menu.
5. The channel scanning now starts. To
interrupt scanning, press MENU at any
time.
6. After you complete the Initial Setup, press
ENTER to exit the wizard.