Promate AuraWatch Mode D'emploi page 6

All manuals and user guides at all-guides.com
Operation Instructions:
Checking the remaining power left in AuraWatch back-up battery
1. To view the remaining power left, press the power button once and view the LED Battery
Level Display
Battery Level
0%〜25%
25%〜50%
50%〜75%
75%〜100%
Charging AuraWatch back-up battery
• Connect one end of the Micro-USB Cable to AuraWatch and the other end to a desktop/laptop
or a USB Power Adapter. The Battery Level LED display will will start ashing to indicate that
the back-up battery is charging normally.
Charging USB chargeable devices using the USB Port
• Plug the USB cable into the USB output port on AuraWatch back-up battery and the other
end into the device.
• Press and hold the power button for 3 seconds to begin charging
LED Status Indicator
Red LED
Yellow LED
Blue LED
Green LED
4