Publicité
7. Press the ON/OFF button (7) to switch off the food slicer.
Note: After 10 minutes of operation let the appliance cool down for
30 minutes. To avoid food sticking on the blade, moisten the blade
with little cooking oil if necessary.
Cleaning and Storing
Keep this appliance and the accessory clean at all times as they
come into direct contact with food.
Always unplug the appliance from the power mains before
cleaning or storing.
For better cleaning, fold down the carriage
unit (5).
Wipe the housing of the appliance with a
lightly moistened cloth. Use detergent as
needed. Do not put it in a dishwasher. Do
not immerse it in water or any other liquids.
Clean the food retainer (3) in soapy water
and dry it well before re-assembling the appliance.
Do not clean the appliance with aggressive chemicals or
abrasives in order not to damage the surface.
Be very careful when handling the blade as
it is extremely sharp. For cleaning the blade
disassemble it as follows. Remove the bolt
in the middle of the blade by turning it
clockwise (step 1). Then carefully remove
the blade (step 2). After cleaning, install the
blade by fixing the gear and moving the bolt
counter clockwise.
Store the food slicer indoors in a place that is protected from dust
and dirt.
Store the food slicer out of reach of children.
Before storing, setup the slicing thickness to the minimum.
All manuals and user guides at all-guides.com
Operating
15
1
2
Publicité
