marinco CHARGE PRO Mode D'emploi

CHARGE PRO
BATTERY CHARGERS
RoHS
BC
Models Amperage
28106 6 Amps
28210
5/5 Amps
SAVE THESE INSTRUCTIONS
This manual contains important safety and operating instructions for the chargers.
Read the entire manual before using. Also read all instructions and cautions for and
on the charger, batteries and equipment in the vicinity of the batteries.
INTRODUCING THE CHARGERS
The Marinco chargers are designed to both recharge your batteries, and extend
your battery's life in applications where it is stored for long periods of time. They
are multi-stage, completely automatic, lightweight, silent, battery chargers and each
output produces 12 Volts DC at either a full 5 or 6 Amps (model specific), while using
much less AC current than other charger types. When the charger is attached to your
batteries and plugged into a standard 115 Volt / 60 Hz AC outlet, the red and green
LED's let you know the unit is recharging and maintaining your batteries. Model 28210
uses Sense-Send Technology to quickly charge two batteries and will automatically
start charging when the battery voltage becomes low.
All manuals and user guides at all-guides.com
INSTRUCTION MANUAL
(PART #'S: 28106, 28210)
IP68
No. Of Banks Volts
1 Banks 12
2 Banks 12/24
®
53AB