Philips Sonicare AirFloss Pro Mode D'emploi page 9

General description (Fig. 1)
1 Guidance tip
2 AirFloss Pro nozzle
3 Activation button
4 Reservoir and reservoir cover
5 Handle
6 Charge & burst mode indicators
- Single burst: 1 LED
- Double burst: 2 LEDs
- Triple burst: 3 LEDs
7 Power on/off button
8 Removable nozzle holder (specific types only)
9 Charger
Note: The contents of the box may vary based on the type purchased.
Charging
Charge the AirFloss Pro for 24 hours before first use.
1 Put the plug of the charger in the wall socket (Fig. 2).
2 Place the handle on the charger (Fig. 3).
The charge indicators flash green to indicate that your AirFloss Pro
,
is charging (Fig. 4).
Note: When it is fully charged, the AirFloss Pro has an operating time of up to
11 days when it is used in triple burst mode, and up to 33 days when it is
used in single burst mode.
Note: When the charge indicators flash yellow, the battery is low and needs
to be recharged (fewer than 3 uses left).
Preparing for use
1 Align the nozzle so the tip faces the front of the handle and press
the nozzle down onto the handle ('click') (Fig. 5).
Note: Replace the nozzle every 6 months for optimal results. Also replace
the nozzle if it becomes loose or no longer 'clicks' onto the handle.
ENGLISH
9