Imetec S0601 Mode D'emploi page 16

Cool air flow button (3)
The blue LEDs indicate that the function is active.
This appliance uses ion technology to keep your hair hydrated while
EN
it is being dried. This function is activated automatically when the
appliance is switched on.
USEFUL ADVICE
1. Preparation for use
After washing, towel dry hair delicately.
2. Method of use - Long hair:
• Tilt your head downwards.
• Gently place a lock of hair into the diffuser.
• Move the Diffuser (blowing hot air) towards the
scalp.
• Keep in place for a few seconds .
• Repeat with other locks of hair, moving inwards
from the outer part.
3. Method of use - Medium/ short hair:
• Move the Diffuser (blowing hot air) towards the
scalp.
• Keep in place for a few seconds.
• Repeat the operation with other locks of hair .
o n .
MAINTENANCE AND CLEANING
Cleaning the appliance
Clean the appliance with a damp cloth when needed. Do not use
solvents or other aggressive or abrasive detergents. Otherwise,
the surface could be damaged. Check the intake opening of the
appliance regularly and remove all hair and dust.
Cleaning the intake filter (6)
If the appliance is provided with an intake filter, clean it as follows:
• Open the filter cap (6A) as shown in the figure (6).
• Wipe the front and rear of the filter (6B) and the filter cap (6A) with a
damp cloth.
• Let the parts dry well and put them back on in inverse order.
WARNING!
the appliance from the socket
before cleaning or performing
maintenance.
WARNING! Make sure all cleaned parts
are completely dry before reusing the
appliance.
Always
14
disconnect