Publicité
Les langues disponibles
Les langues disponibles
Rolling Cart
SKU 1004497894
MODEL # 410-113-0111
Safety Information
Read all instructions before assembling this cart.
I - Connecting Screws x 4
D - Fixed Castors x 2
(Marked A - left / B - right)
Assembly
1
Attaching the legs and castors
IMPORTANT: Ensure you mount the fixed castors on one end of
the base and the pivoting castors on the other end of the base.
Lay the base (AA) on its side.
Align the holes of one leg (A-B) with the holes along one of the
inside corners of the base (AA)
Insert four bolts (F) into the leg (A-B) and through the base (AA).
Attach a castor (D or E) to the bottom of the base by threading
the bolts (F) through the holes and securing to the bottom of the
base using lock washers (G) and nuts (H). Repeat for the
remaining legs and castors and tighten all connections.
Warning: All screws should be tightening force.
A-B
E
H
Warranty
If within 2 years from the date of purchase, this Husky product fails due to a defect in materials or workmanship, return the product to any Home Depot
retail store with a receipt indicating proof of purchase for free repair (or replacement if repair is not possible). This warranty only applies for 90 days from
the date of purchase if this product is ever used in a commercial rental application. This warranty excludes incidental/inconsequential damages and failures
due to misuse, abuse, or normal wear and tear. This warranty gives you specific right, and you may also have other rights, which vary from state to state.
Please see store or call 1-888-43-HUSKY for details.
Assembly Guide
H - Nuts x 16
G - Lock Washer x 16
A-B - Legs x 4
BB- Tray x 1
F
A
A
D
G
F - Bolts x 16
AA - Base x 1
2
Attaching the tray
Place the cart assembly upside down, on the (BB) tray.
Align the plastic pins located on top of each leg (A-B) into the receivers holes
in the top of the tray (BB). Push down on the top of the tray to the seat the
part. The handle on the top tray should be located over the pivoting
castors for ease of use.
Insert the connecting screws (I) between the legs (A-B) and the top of the
tray (BB). Should be tight for all nuts.
Warning: All screws should be tightening force.
Please contact 1-888-43-HUSKY for further assistance.
CAUTION: Do not sit or stand on this cart.
E - Pivoting Castor x 2
BB
A-B
HUSKYTOOLS.COM
Publicité
