NAUTIKA THEIA 70 CFM Guide D'installation page 5

3. Connecting electrical wiring.
Refer to wiring diagram on page 4.
Connect house wires to ventilation fan wires.
Match colors as shown (black to black, white to white, and green to
green) using quick connects or wire nuts (not provided).
Replace the junction box cover. Do not pinch lead wires.
CAUTION: If your house wires do not match these colors, you
must determine what each house wire represents before
connecting and you may need to con suit an electrical
contractor to determine this safely.
WARNING: Failure to wire product correctly could result in electrical
shock, fire hazards, or damage to the product. Consult
a licensed electrician if you are unsure of your ability to
correctly install wiring.
4. Connecting duct work.
Install a circular duct to outlet and secure it with duct tape or clamps.
Install duct work in a straight line with minimal bends.
Fan must be ventilated to the exterior.
5. Attach the light box connector to the empty socket provided in the fan
housing. There is only one possible way to connect to the connector
shapes
6. Installing the fan grill.
Position the fan grid with the fan housing in order to align the holes
for the screws in the middle. Once aligned, fix the grid with the two
screws provided into the holes inside the fan housing.
6.B. Install one (1) GU24, 13 watt bulb.
7. Installing grid light cover.
Slide the male clip from the cover in female insert.
8. Press on the opposite side from the light cover in order to connect
the male and female clips together.
Turn on electricity at breaker box after finishing installation.
BATHROOM FAN – THEIA 70 CFM WITH 1 LIGHT
All manuals and user guides at all-guides.com
4
5
6
7
8
5