Leica Geosystems GKL221 Manuel D'utilisation page 44

_en_GKL221_User.book Page 2 Wednesday, December 10, 2003 11:47 AM
Inserting and removing
2.2 Connecting the Charger
Warning
Start up
Operation
All manuals and user guides at all-guides.com
1
GKL221_005
Inserting
1. Insert the battery adapter along the rear
guiding edge.
2. Press on the front of the battery adapter until
it clicks and locks into place.
Only use the charger in dry rooms! Never use the charger when it is wet or damp!
Always set the charger on a firm surface before starting it up.
Connect the charger either:
• With the supplied mains cable to the mains power socket or
• With the optional GDC211 vehicle adapter to the battery circuit of a vehicle
Pull the plug from the mains socket and from the vehicle's power socket, if the charger will not be used
for a long period.
2
GKL221_006
Removing
1. Press on the front edge of the battery adapter
to open it.
2. Carefully lift it up to the stop point.
3. Remove the adapter by pulling it out forwards.
GKL221
3
2
1
2-2