Publicité
Les langues disponibles
Les langues disponibles
Tooxy
Pressure sensor
Ref :
482 104
ENGLISH
1 General
This sensor measures the pressure in non-corrosive gases.
2 Use
This sensor operates with the Tooxy console in standalone mode (without
computer) or in connected mode (with computer).
2.1 Connecting the sensor to the console
-
Bring the sensor in line with the console connector
-
Insert the connector along the console guide rail.
-
Insert until it clicks into place.
2.2 Start up
Adjustment / calibration: no adjustment is necessary.
2.3 Use in standalone mode and in connected
mode
In standalone mode, the absolute pressure value is displayed on the display
screen.
When connected to the computer, the sensor display screen goes off. The
measured values can only be seen on the computer.
3 Additional equipment
This sensor is used with a 4 mm diameter PVC tube (supplied).
4 Technical characteristics
Range
Resolution
Precision
Measurement time with onboard software
5 After-Sales Service
This material is under a two year warranty and should be returned to our
stores in the event of any defects.
For any repairs, adjustments or spare parts, please contact:
3
0 to 2000 hPa
0.5 hPa
± (1 % + 2LSB) of the value
1 s
JEULIN - TECHNICAL SUPPORT
468, Rue Jacques Monod
CS 21900
27019 EVREUX CEDEX FRANCE
+33 (0) 2 32 29 40 23
Publicité
