weBoost DRIVE SLEEK Guide De L'utilisateur page 8

______
Step 4: Connect System To
Power
Connect the power to the 12V
and route power cable back to the booster.
NOTE: We recommend routing with the same path as the cradle/booster
cable (under mats and between seats). Cable clips are provided to help
route & secure the cables.
connect power supply
to 12V port
Connect power cable to booster port labeled
NOTE: The booster will be on whenever there is power from the 12V CLA
port. If your vehicle always has power going to this port, you may want to
unplug this when you're not driving so the booster does not drain your
*
battery. Only 12V ports are supported.
6
*
CLA port on your vehicle
CELL PHONE SIGNAL BOOSTER DRIVE SLEEK
cable clip
cable clip
connect
to booster
.
cable from power supply