Hydrofarm Active Air HGIOHT Mode D'emploi page 4

"minute" value.
• Press the MODE button
again to save the "minute"
value and the "hour" will
flash. Press the SET button to
change the "hour" value.
• Press the MODE button twice
to confirm the alarm setting
and return to normal time
mode. The bell symbol will
stay to show the alarm is set.
• The alarm will sound when
the clock reaches the alarm
set time. Pushing any key can
turn off the alarm.
6. Alarm Deactivation
• In normal time mode, press
the MODE button to switch
to alarm mode. The current
alarm set time will appear
and the bell symbol will flash.
• Press the SET button to
deactivate the alarm. The bell
symbol will disappear. The
previous alarm set time will
remain in memory.
• Press the MODE button to
return to normal time mode.
7. Alarm Re-activation
• In normal time mode, press
the MODE button to switch
www.Hydrofarm.com
4
All manuals and user guides at all-guides.com
INSTRUCTIONS
• If you don't need to change
• If you need to change the
MEASURING RANGE
Indoor Thermometer:
Temperature Range Indoors (C):
-10° to 50° (14° to 122°F)
• Resolution: 0.1°
• Accuracy: +/-1°
Outdoor Thermometer:
• Temperature Range Outdoors (C):
• Resolution: 0.1°
• Accuracy: +/-1°
to alarm mode. The previous
alarm set time will appear.
the alarm set time, press the
SET button to activate the
alarm. The bell symbol will
appear and flash. Press the
MODE button to save and
return to normal time mode.
alarm set time, press and
hold the MODE button for 2
seconds to change set time
by following the alarm setting
procedures stated above.
Press the MODE button to
save and return to normal
time mode.
-50° to 70° (-58° to 158°F)