Publicité
Les langues disponibles
Les langues disponibles
4
152351
STEREO ZOOM MICROSCOPE SVZB / SVZT
Operating instructions
Introduction
In purchasing a NERIOX Stereo Zoom Microscope, you have chosen a quality product.
It is suitable for use in schools and laboratories as well as in industry.
The Stereo Zoom Microscope consists of two separate microscope tubes, which are combined into one unit to allow simultaneous focusing on the object. Each tube has a
prism, an achromatic lens and a wide field eyepiece. This creates a large, flat field of view. Both eyes view the object at a slightly different angle, which creates a stereoscopic
effect.
With normal use, the maintenance requirement is reduced to a minimum.
These operating instructions provide information on the design, handling and maintenance of the microscope.
Design of the Stereo Zoom Microscope
Below you will find the designation of the individual components, which are also shown in the illustration:
1. Eyepiece
2. Dioptre correction
3. Prism housing
4. Zoom adjustment (2 rotary knobs)
5. Lens housing
6. Incident illumination
7. Rotary knob transmitted light
8. Rotary knob incident light
9. Main switch
10. Object clamp
11. Object plate
12. Stand base with transmitted
light illumination
13. Head support
14. Locking screw (3 pcs.)
15. Focusing (2 rotary knobs)
Operating principle of the individual components
The Stereo Zoom Microscope consists of a stand with a head support, into which the stereo head is inserted and then fixed with the locking screws.
Always hold the microscope by the stand when you want to move it.
Tube
The head of the Stereo Zoom Microscope is equipped with a 45° tube that can be rotated through 360°. The head also has dioptre correction on both eyepiece tubes.
Optical specifications (versions)
The Stereo Zoom Microscope has 2 zoom lenses and a pair of wide field WF 10x eyepieces.
Model no.
152351.0100
152351.0200
Object stage
The stand is equipped with an object stage with a transparent object plate and two object clamps. A black and white object plate is provided as a standard accessory.
Focusing
Focusing is used to bring the image of the object into focus.
1
2
3
4
14
5
6
10
1 1
1 2
Eyepieces
WF10x
WF10x
Lenses
Magnification
0.7x ... 4.5x
7x ... 45x
0.7x ... 4.5x
7x ... 45x
13
15
9
7
8
Version
T ube
binocular
45°
trinocular
45°
Publicité
