Nonjetable 047202 Mode D'assemblage page 2

BIBLIOTHEQUE NONJETABLE®
REF 047202
ENGLISH
ASSEMBLY INSTRUCTION
Tools : Phillips screwdriver (short)
Fittings :
16 x Rafix screw 34 x MiniFix housing
1) Put the 1 st shelf (1) horizontally on the floor. Screw on the MiniFix screw bolts in their respective holes
with metal inserts.
2) Fix the back panels BP3 and BP4 with metal pegs, MiniFix screw bolts and wooden pins.
3) Insert the dividers (D1, D2 and D3) in the MiniFix screw bolts in a vertical position.
4) Insert the MiniFix housings in their respective holes on the D1-D8 dividers (4 per divider).
Carefully align the arrow of the MiniFix housings towards the connecting bolt before tightening them
with a Phillips screwdriver.
5) Continue with the 2 nd shelf (2): Screw on the MiniFix screw bolts in their respective holes with metal inserts.
6) Position the 2nd shelf on the dividers (D1, D2 and D3) and tighten all the MiniFix housings.
7) Fix the back panel BP2 with metal pegs, MiniFix screw bolts and wooden pins.
8) Insert the dividers (D4 and D5) in the MiniFix screw bolts in a vertical position.
9) Tighten the (D4 and D5) MiniFix housings with a Phillips screwdriver.
10) Position the 3rd shelf on the dividers (D4 and D5) and tighten the MiniFix housings.
11) Assemble with the side pieces: Screw on the Rafix screws in their respective holes, 8 on the right side (R)
and 8 on the left side (L).
12) Put down on the floor one of the side pieces, Rafix screws upwards. Then turn the mounted bookshelf
unit on its side and assemble it to the side piece.
13) Fix the shelves (1, 2 and 3) by tightening the Rafix screws from the bottom with a Phillips screwdriver.
14) Assemble the back panel BP1 with the dividers (D6, D7, and D8) using the MiniFix connecting bolts,
screw bolts and wooden pins.
15) Position all on the 4th highest shelf (D6, D7 and D8 with BP1) and assemble with the MiniFix screw
bolts and wooden pins.
16) Position the 4th shelf on the Rafix screws and tighten the screws with a short Phillips screwdriver.
17) Assemble the 2nd side piece on top of the side positioned mounted shelf unit.
18) Put the bookshelf back to its upstanding final position.
19) Assemble the doll house / CD-DVD divider structure by sliding one piece into the other and insert it to its place.
20) Wipe all surfaces with a humid gentle cloth, and let your child discover.
NONJETABLE, France. 2009 www.nonjetable.com
34 x MiniFix screw bolt 16 x metal peg 45 x wooden pin