Troubleshooting Guide - VOCO VisCalor Manuel D'utilisation

Battery Removal & Replacement
To remove battery compartment door, press the release button and
separate from device by pulling.
Remove the old battery and replace with the new battery, ensuring
that +/- indicators are properly aligned as indicated on the battery
door.

Troubleshooting Guide

If the suggested solutions do not rectify the problem, please contact
VOCO.
Problem
VisCalor® Dispenser will not turn on
VisCalor® Dispenser is not heating
18
Dispenser
Possible Solution
1. Check the unit's battery indication light. If red or
no light, charge the unit.
2. Remove the battery and check orientation.
Reinsert into the device in proper orientation.
1. Verify the unit is charged.
2. Verify that an appropriate temperature is selected.
3. With the handpiece turned off, and battery
removed, inspect the lens for residual composites.