Publicité
Setting Up the Canopy
1
OPENING THE CANOPY FRAME
□
With a person on each end, lift and partially pull the canopy
frame apart.
2
ATTACHING THE CANOPY TOP
□
Unfold the canopy top and place on top of the canopy frame.
□
Secure the canopy top to the corners of the canopy frame using
the Velcro connections.
3
LOCKING THE FRAME
From under the canopy, place one hand on the upper frame
□
and use the other hand to push the central hub straight up
until it clicks into the central pole.
□
Finish attaching the large canopy inside the canopy frame
using the Velcro loops.
06
Setting Up the Canopy
4
ADJUSTING THE CANOPY HEIGHT
Lift up one side. Grasp the outer or upper leg with one hand and
□
pull out the inner leg with the other.
Extend until the spring button engages.
□
Set legs to desired height.
□
5
SECURING THE CANOPY IN PLACE
□
Insert a stake into the foot of each canopy leg.
□
Measure out from the each leg to a proper distance and secure
four stakes to the ground. Tie the pre-attached ropes to the
stakes in the ground. Ensure that the rope has the proper
tension by adjusting the plastic adjusters on the ropes.
KEEP ALL FLAME AND HEAT SOURCES AWAY FROM
WARNING
THIS TENT FABRIC.
Take care not to pinch your fingers in the frame during
set up and take down.
Never set up or continue to use in any rain, wind, or
storm conditions, especially lightning storms.
07
Publicité
