3com 3CRUSBN175 Guide D'installation Rapide page 14

14 What to Do Next
■
■
If your network is using WPA or WPA2 encryption, you must enter
an 8 – 63 character alphanumeric key-phrase.
8 Select Connect. The Wireless Network Connection dialog box
appears again as you are being connected. Once successfully
connected to Generic1, as shown below, click the check box to
Save this network. Verify that Start this connection automatically
is enabled.
9 Click Close.
HEX — 10 Characters in HEX notation for 40 bit or 26
characters for 128 bit encryption.
ASCII — 5 Characters for 40 bit or 13 characters for 128 bit
encryption.