Publicité
Les langues disponibles
Les langues disponibles
Congratulations on your purchase of the Hyundai Touchless
Thermometer.
Read this manual carefully to understand how to use the
thermometer. Keep this manual for future reference as it
contains important information.
SAFETY INSTRUCTIONS
• Use the product only for the specified purpose.
• The thermometer must not come into contact with water.
• Store the thermometer in a dry and tidy place. Try to avoid
direct sunlight.
• Do not use the thermometer if it is damaged.
• Do not drop the device, the fall can have an impact on the
functions.
• Using a thermometer does not replace a doctor's visit.
PRODUCT DESCRIPTION
1.
Display
2.
SCAN-Button
3.
ON/OFF button
4.
Battery cover
5.
Sensing head
6.
Mode Switch: Select "body" to measure a person's
body temperature; select "object" to measure the temperature
of objects
DESCRIPTION DISPLAY
SETTING
Description
BODY MODE
can perform measurement of body temperature
OBJECT MODE
Can perform measurement of object
temperature
DEGREE CENTIGRADE
Measure by degree centigrade
MEMORY MODE
Display measurements value from memory
OPERATING INSTRUCTIONS FOR THE THERMOMETER
How do you switch between ° C and ° F?
In Off mode, press the SCAN button for 8 seconds. Now you
can choose between ° C and ° F. Press the on / off button to
confirm your setting.
TECHNICAL SPECIFICATIONS
Accuracy:
Body mode +- 0.2°C (35.0 – 42.0 °C inside use), +- 0.3 °C
(35°C – 42 °C outside use)
Object mode: +- 0.5 °C (0 – 100 °C)
measuring range:
Body mode: 32.0 tot 42.9 °C
Object mode: 0 tot 100 °C
operationg temperature:
body mode: 15.0 tot 40.0 °C
Object mode: 5 tot 40 °C
PROCEDURE
Description
STARTING UP
Turn on this device by
pressing O/I button.
MEMORY
The last reading will
automatically display
on the screen for two
seconds.
PREPARATION OF MEA-
SUREMENT
This device has been
prepare for measuring.
FINISHING OF MEA-
SUREMENT
The measurement result is
shown in the display.
Red backlight = fever;
green backlight = no
fever.
READY FOR THE NEXT
MEASUREMENT
The thermometer is
ready for a second
measurement after 2
seconds.
Publicité
