Publicité
Les langues disponibles
Les langues disponibles
If the braking is too soft, the cable must be retightened.
➢
•
7.4.2 Maintenance of screws:
Check the screws of each part carefully before using the scooter. The screws
must not be loose or too damaged.
•
7.4.3 Adjusting the Stem:
If you feel vibrations while riding, you may need to check the tightness of the
wheel.
•
•
counter-clockwise.
•
•
counter-clockwise.
•
➢ Lift up the plastic tabs at the
bottom of the stem on the deck
side.
➢ Use the Allen key to tighten
the screws.
Use the 4mm Allen key provided.
Loosen
the
screw
Pull the brake cable back slightly.
Tighten
the
screw
Repeat if necessary to fine-tune it
by
turning
it
by
turning
it
p. 62
Publicité
