Watts 825Y Serie Instructions D'installation page 2

Kit Components
The retrofit connection kit for installing and
activating the flood sensor includes the items
shown below. If any item is missing, speak with
your account representative about ordering
code 88009427.
A. Activation module with 8' conductor cable and ground wire
C. Small sensor for valve sizes 3/4" to 1"; large sensor,
valve sizes 1¼" to 2"
NOTICE
When installing an air gap, attach the air gap brackets directly
onto the flood sensor.
Requirements
• #2 Phillips screwdriver
• 120VAC, 60Hz, GFI-protected electrical outlet
(for kit power adapter), or power source ranging from
12V to 24V
• Wire stripper
B. 24V DC power adapter
2